SWITCHPOINT
HIGH-VOLTAGE SOFTWARE
HIGH-VOLTAGE SWITCHING SOFTWARE
From single line
to signed program.
Build your switching program on the drawing. Check it against your site model. Bring the sign-off, permits and field records together.
Available for demonstrations, site onboarding and commissioning projects.
A BRIGHT IDEA.
BUILT FOR HV.
Your plant. Your procedure. Your people.
Drawing-led planning · Site-model checking · Sealed, issued records
MORE THAN ANOTHER BLANK TEMPLATE
See the sequence.
Keep the whole story.
Switchpoint HV connects the people preparing, checking and approving a switching program. The drawing, the program and the record stay in the same conversation.
01
Build on the drawing
Prepare switching programs on your site’s single line diagram, or bring in an existing switching sheet.
02
Check before sign-off
Check the program against your site model and review the findings before it goes for approval.
03
See what changes
See what each program changes on the drawing, not just in a list of steps.
04
Bring sign-off together
Keep preparation, checking and approval connected to the program and its documents.
05
Take the record to site
Capture the switching record on site, right alongside the program.
06
Keep the complete picture
Issue sealed switching instructions and permits, with a clear history of who did what and when.
━━━ Built around practical high-voltage and commissioning experience.
CONTROLLED FROM SIGNATURE TO ISSUE
Signed by the right people.
Issued as approved.
Switchpoint HV keeps sign-off, issue and access under control, so the program issued to site is the program that was approved.
01
The right signatures
Sign-off follows your site’s authority matrix. Each sign link belongs to the person it was sent to.
02
Permits confirmed
The permit list must be confirmed, with an override for the HVO.
03
Sealed when issued
Signed programs and permits are issued as sealed PDFs, with a protected Word copy.
04
Honest findings
A step the modelled interlocks would refuse is a major finding. A step the model can’t check is marked not assessed, not passed.
━━━ Your server or Switchpoint Cloud. Run Switchpoint on your own server, or ask about hosting on Switchpoint Cloud. Either way, your site can be restricted to the people you approve.
ON SITE
The program goes to site.
The record comes back.
The issued program travels on a phone, and everything recorded on site comes back to the same record.
01
Faults and observations
Report a fault with photos and short video against the program step where it was found.
02
Pre-job briefings
Walk the crew through the program on the drawing, one step at a time.
03
People and site documents
Keep licences, authorisations, site inductions and signed site forms with their evidence, and see what is expiring.
04
One-tap times
Record the date and time with a single tap of the Now button.
━━━ Evidence stays with the site. Photos and videos are shown only to people who can see that site, and certificates only to administrators and the person they belong to.
WAYS TO USE SWITCHPOINT
Licence a site.
Or just the project.
Run Switchpoint on an operating site, use it for a commissioning project, or have us prepare the programs with your team. Prices are indicative, in Australian dollars, excluding GST. Your formal quote follows a short scoping call and a look at your drawings.
01
Operating site
A$1,250 a month for your first site and less for each extra site, on a 12-month term, with 10 named users and 100 GB of storage included. Paying annually in advance takes 5% off.
02
Commissioning project
Use Switchpoint for 1 to 12 whole months, with no annual commitment: A$1,250 a project month for your first site.
03
Managed commissioning support
We prepare and review your switching programs and coordinate approvals in Switchpoint, at A$175 an hour, remote. Your HVC and HVA still verify and authorise every program.
04
Site setup
A one-off price per site, fixed in your quote once we’ve seen your drawings. From A$5,800 for a small site.
━━━ Price it yourself. Get an indicative price at estimate.switchpointgroup.app, or download the capability overview and price guide (PDF).
YOUR SITE IS THE STARTING POINT
Your plant isn’t generic.
Your setup shouldn’t be either.
Switchpoint is set up from your drawings and procedures, then reviewed with your HV team. Your equipment, your terminology and your way of working shape your site.
Site setup, review and acceptance are part of onboarding. Your site’s HV authority agrees how Switchpoint is used before anyone relies on it.
01 Scope your site
Agree the plant, people and documents involved.
02 Build and review
We set up your site and walk it through with your HV team.
03 Test and accept
Your HV authority reviews and accepts it before it’s relied on.
04 Bring the team on board
Set up your users, with documentation and support.
For the people who
know the plant.
HV operators, controllers and authorities. Electrical contractors, commissioning teams and asset owners. Switchpoint supports the people doing the work—not a software substitute for their judgement.
SEE SWITCHPOINT IN ACTION
See what Switchpoint
can do for your site.
Book a demonstration, talk through your site, and see how Switchpoint fits your switching workflow. Demonstrations use a fictional demo site, so no client information is shown.
Ian Matthews
Switchpoint enquiries through I.C.M
ian@icmelectric.com
0407 705 917
Get an indicative price online ↗
Electrical contractors and consultancies: ask about partnering.
Request a demonstration
Tell us your company and what you would like to see. No confidential site documents are needed for an initial enquiry.
I.C.M will use your details to respond to your Switchpoint enquiry, in line with our Privacy Policy. Please don’t include confidential site information.